KDC AFWC AND AFWD SERIES "BENCH/FLOOR" MULTIFUNCTION SCALE

Versatile bench or floor scale with attached column, for control and production. Pieces counting, weight control, and totalisation function. Available also CE-M APPROVED for legal for trade use.

TECHNICAL FEATURES

  • Backlit LCD display with 6 digits 24mm high, easily visible from all angles with adjustable inclination.
  • Membrane waterproof keypad with 7 keys anc acoustic feedback.
  • ABS case and indicator support column.
  • Stainless steel plate, size:
  • – C model 350x450mm;
  • – D model 420x520mm.
  • Built-in rechargeable battery (about 70h battery life) and 230Vac power adapter.
  • Overall height from ground with indicator and column:
  • – C model 860mm;
  • – D model 920mm.
  • Packaging:
  • – C model: 780 x 500 x 220 mm size – approximate weight of 15,5kg;
  • – D model: 970 x 600 x 230 mm size – approximate weight of 17kg.
  • Upon request:
  • – ACCREDIA calibration with issuing of relative certificate;
  • – 3000e CE-M approval.
  •  

FUNCTIONS

  • counting;
  • weight check, with 2 thresholds and acoustic alarm;
  • weight totalisation, in loading or in unloading;
  • unit conversion: kg, g, lb, oz;
  • weighing filter selection;
  • setting range of auto-zero at the switch-on;
  • zeroing;
  • zero tracking;
  • semi-automatic tare;
  • digital calibration;
  • backlight command;
  • low battery warning.

MAIN FUNCTIONS

  • Quantity (pieces, litres, Newton, metres etc.) multi scale counting functions:
  • – High precision counting in loading and unloading- Entry of reference quantity
  • – Entry of known Average Piece Weight or conversion factor
  • – Automatic optimization of A.P.W.
  • – Pieces or quantities dosage, with weight thresholds linkable to the article
  • – Print of quantity, average piece weight and all the relative data.
  • Weight and quantity totalization functions:
  • – Totalization in loading and in unloading.
  • – Manual or automatic totalization.- Totalization and automatic tare execution.
  • 4 levels of totals zeroable and printable in an independent way: partial total, general total, grand total, total by article.
  • Selfweighed, presettable tare (direct or calculated), manual or automatic tare; unlocked automatic tare function at the end of the weigh operation.
  • Selection of visualized data on the graphic LCD display (totals, progressives, weight, quantity…).
  • Completely configurable keyboard functions according to the customers’ needs.
  • Multifunction weight repeater:
  • – reception and visualization of the weight from a scale or an external device through serial port, with the possibility to use the received data for all the available functions (for example, for calculating A.P.W. on one scale with very high precision).
  • 15 configurable and printable text ID`s containing 32 characters, for example: Code, lot ID, operator ID, shift number, etc.
  • Database of 1000 Articles with 3 alphanumeric descriptions of 2 lines of 20 characters, Average Piece Weight, tare, customer, 3 set point in pieces.
  • Database of 200 Customers with alphanumeric description of 5 lines of 30 characters.
  • Database of 300 Tares for each scale (up to 4 scales).
  • Selection of Article, Customer, Tare from the database through bar code reader emulating the keyboard.
  • “Calculator” function: it is possible add, subtract or multiply two values, print the result and apply it to the tare.
  • Programmable printout from keyboard or from PC (through the free Dinitools.net software) of 30 print formats linkable to various functions (Print key, Totalization, Article Total, Partial total, General total, Grand total, First weigh heading); each print format may contain up to 2048 positions which may be ASCII codes or preconfigured print blocks (i.e. Company name, number of pieces, lot and weigh progressive numbers, gross weight, tare, net, date and time, etc.).
  • Prints list of last 50 weighs.

Start typing and press Enter to search

Shopping Cart

No products in the cart.